Unfortunately there are no products that meet your search criteria. Please modify your last search.
Calsil ADH 1 TAB
1 Part neutral thixotropic adhesive sealant
Unique product features
- Non corrosive
- Excellent adhesion
- Fast skinning
- Low odour
Download datasheet
Calsil ADH 1 TAT
CALSIL ADH 1 TAT is a specially formulated neutral cure silicone sealant designed for use with sensitive electronic assemblies.
Unique product features
- Non corrosive
- Excellent primerless adhesion to many substrates
- Excellent dielectric properties
- Low odour
Download datasheet
Calsil ADH 11 AG2
2 Part RTV silicone adhesive sealant paste non corrosive (Alcoxy) fast cure
Unique product features
- 10:1 volumetric ratio for machine or cartridge dispensing
- Fast curing at room temperature ·
- 20 minutes of working time at room temperature
- Adhesion to many substrates
Download datasheet
Calsil ADH 11 AT
1 Part neutral self levelling adhesive sealant
Unique product features
- Non corrosive
- Adhesion to many substrates
- Meets the physical and chemical requirements of MIL A-46146B
- Contains UV trace for easy detection
Download datasheet
Calsil ADH 3 TAB
1 Part high temperature thixotropic adhesive sealant
Unique product features
- Flexibiltiy from - 60 to +300°C
- Resistant to solvents and chemicals
- Good electrical insulation properties
- Excellent bonding to a wide range of substrates
Download datasheet
Calsil ADH 3 TAR
1 Part high temperature thixotropic adhesive sealant
Unique product features
- Flexibiltiy from - 50 to +300°C
- Resistant to solvents and chemicals
- Good electrical insulation properties
- Excellent bonding to a wide range of substrates
Download datasheet
Calsil ADH 3 TAT
1 Part thixotropic adhesive sealant
Unique product features
- Flexibiltiy from - 60 to +250°C
- Resistant to solvents and chemicals
- Good electrical insulation properties
- Excellent bonding to a wide range of substrates
Download datasheet
Calsil ADH 3 TAW
1 Part high temperature thixotropic adhesive sealant
Unique product features
- Flexibiltiy from - 60 to +300°C
- Resistant to solvents and chemicals
- Good electrical insulation properties
- Excellent bonding to a wide range of substrates
Download datasheet
Calsil ADH 31 AR2
2 Part RTV silicone adhesive sealant paste fast cure
Unique product features
- Good adhesion and fast assembly
- Heat accelerated cure at 120°C
- Sufficient anaerobic cure for handling in 25 minutes (not possible with conventional 1-Part RTV sealants)
- Similar physical properties to the conventional sealant
- Can be heat accelerated
Download datasheet
Calsil ADH 31 AW
1 Part self levelling high temperature adhesive sealant
Unique product features
- Flexibiltiy from - 60 to +300°C
- Resistant to solvents and chemicals
- Good electrical insulation properties
- Excellent bonding to a wide range of substrates
- FDA compliant
Download datasheet
Calsil ADH 33 AT
an Industrial adhesive sealant that cure at room as soon as the product comes into contact with atmospheric moisture.
Unique product features
- Acetoxy
- Extra fluid
- Fast cure
- Stable and flexible from -50°C + 250°C
- Self-adhesive: usually no primaire is needed
Download datasheet
Calsil ADH 42 B
1 Part neutral thixotropic adhesive sealant
Unique product features
- Non corrosive
- Good spreading and tooling properties
- Fast skinning
- Good adhesion to most substrates
Download datasheet
Calsil ADH 42 R
1 Part neutral high temperature thixotropic adhesive sealant
Unique product features
- Very good temperature resistance to 300°C
- Solvent free
- Fast skinning
- Excellent adhesion to many substrates
Download datasheet
Calsil ADH 42 W
1 Part neutral thixotropic adhesive sealant
Unique product features
- Non corrosive
- Good spreading and tooling properties
- Fast skinning
- Good adhesion to most substrates
Download datasheet
Calsil B23
Calsil B23 is 100% active silicone copolymer
Unique product features
- Calsil B23 imparts instant wetting and moisture transfer across nonwoven substrates
- Provides hydrophilicity of nonwoven substrates, particularly polyolefin coverstocks
- Improves feel of treated non woven
- Profoamer for PU foam coatings
- More compatible with organic resins than polydimethylsiloxane
- Slip, mar resistance, antiblocking
- Increases gloss
- Reduces orange peel, non irritant to skin
- Imparts soft silky feel to the hair
- Ensures smooth wet shavings foams
Calsil B26
Calsil B26 is a silicone glycol copolymer soluble in water, alcohol and hydroalcoholic systems
Unique product features
- Calsil B26 imparts instant wetting and moisture transfer across nonwoven substrates
- Improves feel of treated non woven
- Foam builder, forms a dense, stable foam
- Slip, mar resistance, antiblocking
- Imparts soft silky feel to the hair
- Easy spreadability
- As anti-fog agent in glass cleaners
Calsil CB10
Approximately 16% of a high viscosity Dimethiconol gum blended with volatile Cyclopentasiloxane.
Unique product features
- Excellent spreading
- Leaves a unique soft feel and lubricity
- Non-greasy feel, non-occlusive and non-irritating
- Odorless, colorless, non-stain.
Calsil CB12
Cyclopentasiloxane & Dimethicone.
Approximately 15% of a high viscosity Dimethicone gum blended with volatile Cyclopentasiloxane.
Unique product features
- Excellent spreading • Leaves a unique soft feel and lubricity
- Non-greasy feel, non-occlusive and non-irritating
- Odorless, colorless, non-stain
Calsil CB16
Standard & Tailored Gum Blends.
A high viscosity Dimethiconol gum blended with a low viscosity Dimethicone fluid
Unique product features
- Excellent spreading
- Leaves a unique soft feel and lubricity
- Non-greasy feel, non-occlusive and non-irritating
- Odorless, colorless, non-stain.
Calsil CB25
Standard & Tailored Gum Blends.
A high viscosity Dimethiconol gum blended with volatile Cyclohexasiloxane.
Unique product features
- Excellent spreading
- Leaves a unique soft feel and lubricity
- Non-greasy feel, non-occlusive and non-irritating
- Odorless, colorless, non-stain
Calsil CB53
Cyclopentasiloxane (&) Dimethicone & Paraffinum Liquidum.
CALSIL™ CB 53 can be used in a wide range of cosmetics and hair applications, combining the excellent spread of Cyclopentasiloxane power and allows a good distribution of Dimethiconol gum and paraffinic oil on the skin or hair.
Unique product features
- Excellent spreading
- Leaves a unique sensory feeling and lubricity
- Non-greasy feel, non-occlusive and non-irritating
- Odorless, colorless, non-stain
Calsil CC16
Cyclohexasiloxane and Dimethicone Vinyl Dimethicone Crosspolymer
Unique product features
- Achieves non sticky formulation
- Leaves a unique soft powdery feel
Calsil CC17
Cyclopentasiloxane and DimethiconeVinyl Dimethicone Crosspolymer
Unique product features
- Achieves non sticky formulation
- Leaves a unique soft powdery feel
Calsil CE20A
Amodimethicone and C11_C15 Pareth_5 and C11_C15 Pareth_9
Unique product features
- Specially designed for transparent 2-In-1 shampoo + conditioner
- Superior wetting and filming on hair
- Leaves hair with a uniquely soft and non-greasy feel
- Can be further diluted or formulated directly into the hair treatment
Calsil CE20Q
Silicone Quaternium 17 and C11_C15 Pareth_5
Unique product features
- Specially designed for transparent 2-In-1 shampoo + conditioner
- Superior wetting and filming on hair
- Easy combing, leaves soft and non-greasy hair
- Can be further diluted or formulated directly into the hair treatment
Calsil CE49
Amodimethicone & Cetrimonium Chloride & Trideceth-12
Unique product features
- Avoids reactive silicone aggregates gelling and deposition in the production vessels
- Excellent spreading
- Leaves a unique soft feel and non-sticky touch
Calsil CE78
Dimethiconol & TEA-Dodecylbenzene Sulfonate
Unique product features
- For use in shower gels and hair care applications
- Improves wet/dry combing
- Leaves a unique slippery and then soft feel to the hair.
Calsil CG13
Cetyl PEG 12 Dimethicone
Unique product features
- Very low surface tension
- High conditioning and wetting
Calsil CG19
Cetyl PEG_PPG 10_1 Dimethicone
Unique product features
- Very low surface tension
- Specially designed for water in Cyclopentasiloxane and water in oil and multiple emulsions
Calsil CLv - Dimethicone
Dimethicone
Unique product features
- Excellent spreading
- Leaves a unique soft feel and lubricity
- Non-greasy feel, non-occlusive and non-irritating
- Odorless, colorless, non-stain
Calsil CP20
Phenyl Trimethicone
Unique product features
- Excellent spreading
- Increase shine and brightness
- Leaves a unique soft feel and lubricity
- Non-greasy feel, non-occlusive and non-irritating
- Odorless, colorless, non-stain
Calsil CV02
A low-molecular-weight volatile polydimethylsiloxane fluid with a viscosity of 2.0 cSt (Dodecamethylpentasiloxane).
Unique product features
- Excellent spreading
- Fast evaporation with no residue
- Leaves a unique sensory feeling and lubricity
- Non-greasy feel, non-occlusive and non-irritating
- Odorless, colorless, non-stain.
Calsil CV50
Cyclopentasiloxane
Unique product features
- Excellent spreading
- Very fast evaporation leaving no residue or buildup
- Leaves a unique soft feel and lubricity
- Non-greasy feel, non-occlusive and non-irritating
- Odorless, colorless, non-stain.
Calsil CV56
Cyclopentasiloxane & Cyclohexasiloxane
Unique product features
- Excellent spreading
- Fast evaporation leaving no residue or build-up
- Leaves a unique soft feel and lubricity
- Non-greasy feel, non-occlusive and non-irritating
- Odorless, colorless, non-stain
Calsil CV60
Cyclohexasiloxane
Unique product features
- Excellent spreading
- Fast evaporation leaving no residue or buildup
- Leaves a unique soft feel and lubricity
- Non-greasy feel, non-occlusive and non-irritating
- Odorless, colorless, non-stain
Calsil Grease 33
Polysiloxane methylphenyl fluid with lithium soap
Unique product features
- Compatible to extreme temperatures (from - 70°C up to + 180°C)
- NLGI consistency : N.2
- Low variation of the consistency in temperature
- Resistance to heat: Slight lowering of viscosity with increasing temperature but does not decompose and gives a long service life
- Very little change in consistency with temperature: does not stiffen when cold, does not thin out at high temperatures
- Very good stability especially in contact with water and most corrosive media
- Negligible effect under vacuum: no change in consistency
Download datasheet
Calsil Grease 55
Silicone oil with lithium soap.
Unique product features
- Compatible to extreme temperatures (from - 70°C up to + 180°C).
- NLGI consistency : N.2
- Low variation of the consistency in temperature
- Résistance to heat: Slight lowering of viscosity with increasing temperature but does not decompose and gives a long service life
- Very little change in consistency with temperature: does not stiffen when cold, does not thin out at high temperatures
- Very good stability, especially in contact with water and most corrosive media
Download datasheet
Calsil IMH LV
Industrial Methyl Hydrogen Silicone polymer, CAS No. 63148-57-2.
Unique product features
- Can be formulated into a waterproof film using metal salt catalyst at low temperature
- Outstanding waterproofing preventing moisture, mildew and rust damages
Download datasheet
Calsil IT 50
A polydimethylsiloxane dielectric fluid specially meeting IEC 836 and ASTM D 4652-92 standards, qualified to be used in electric transformers.
Unique product features
- Excellent dielectric properties and operating capabilities over a wide temperature range
- Excellent thermal stability (designed to operate at both high and low temperatures)
- Good heat transfer properties
Download datasheet
Calsil MB 50 WB
Calsil® MB 50 WB is a water dilutable, solventless emulsion, based on a blend of modified siloxanes and silanes. Formulations based on Calsil® MB 50 WB Water serve as high quality, general-purpose water repellents for impregnating and priming mineral surfaces. Further Calsil® MB 50 WB water can be used for the mass treatment of non-load bearing concrete products.
Unique product features
- Provides a long lasting limitation of the water penetration in the walls and facades without blocking their breathability
- Quick drying and rapid development of water repellency on all neutral and alkaline substrates.
- Resistance to alkalis
- Stable in storage, even when diluted
Calsil MNF 620 IP
C6 solvent-based fluorocarbon resin. Free of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS)
Unique product features
- Breathable
- Highly penetrating
- Suitable for all absorbent natural or artificial stones such as marble, travertine, Solnhofen slabs, sandstone, concrete blocks, terrazzo, granite and cotto coverings.
Download datasheet
Calsil MPA 50
Calsil MPA 50 is a solvent-free additive for aqueous coating systems, such as façade colors or plaster based on silicate, dispersion silicate, silicone resin and dispersions. It reduces water absorption and improves beading effects; it does not affect the water vapor permeability.
Unique product features
- Reduces water absorption
- Improves beading effects
- Does not affect water vapor permeability
Calsil MPB 50
Calsil MPB 50 is an aqueous emulsion of modified polysiloxane resin to make resin to make silicone resin façade coating.
Unique product features
- Highly water-repellent, with high water vapor permeability
- High early water resistance
- Low tendency to soil
Calsil PA ACC
CALSIL PA ACC is a curing accelerator agent for RTV PA (Polyaddition).
Unique product features
- The action is immediate
- Can be used with all Calsil RTV PA (Polyaddition)
Download datasheet
Calsil PA THIXO
a thickening agent for CALSIL RTV PA (Polyaddition)
Calsil Paste 408 ES
Grease like compound containing a PMDS silicone fluid and inert filler
Unique product features
- NLGI Consistency : N.4
- Excellent work stability
- Can be used from –50ºC to +200ºC
- Excellent water repellence
- Non Melting even in hot climates
- Non corrosive to metals
Download datasheet
Calsil Paste 4E
A grease like compound containing a PMDS silicone fluid an inert silica filler.
Unique product features
- High dielectric strength
- Low volability
- Boric acid free
Download datasheet
Calsil Paste 4FG
A grease like compound containing a PMDS silicone fluid an inert silica filler.
Unique product features
- Food grade (under certification NSF H1)
- Low volability
- Boric acid free
Download datasheet
Calsil Paste MR7
Polydimethylsiloxane oil based silicone paste with inert fillers
Unique product features
- Adapted to mould release applications in the rubber and plastics industries
- NLGI consistency : N.2
- Does not burn onto the moulds
- Reduces maintenance
- Reduces the part reject rate
- Improves the appearance on the moulded parts
Download datasheet
Calsil Paste SL 431
a polydimethylsiloxane oil based silicone paste with inert fillers
Unique product features
- Self-levelling paste. NLGI consistency : N.0
- Low temperature resistance (- 60°C)
- Hydrophobic
- Chemically inert on most substances
- Resistance to acidic atmospheres
Download datasheet
Calsil Paste T30
A polydimethylsiloxanic silicone fluid containing Zinc Oxide as filler. This paste is has good thermal conductivity properties.
Unique product features
- Thermal coupling of electrical – electronic device to heat skins
- Good thermal conductivity properties
- Good thermal dissipation
- Good consistency from -50°C to +300°C
- Chemically inert
- Good dielectric properties
Download datasheet
Calsil Paste Vacuum
A silicone paste based on polydimethylsilixone oil and inert fillers.
Calsil PC THIXO
a thickening agent for CALSIL RTV PC (Polycondensation)
Unique product features
- Can be used with all Calsil RTV PC
- when you want to apply vertically the silicone rubber
Download datasheet
Calsil RTV PA 04 A+B
It’s a pourable bi-component RTV-2 silicone rubber, vulcanizing at room temperature with a poly-addition
process without shrinkage.
Unique product features
- Very low hardness : 4 Sh.A
- Low viscosity : 1800 mPa.s
- Biocompatible and non-toxic
- Excellent degassing
- Short working time/setting time
Download datasheet
Calsil RTV PA 05
a pourable bi-component RTV-2 silicone rubber
Unique product features
- Very low hardness (5 ShA)
- Low Viscosity
- Short working time/setting time
- Excellent degassing
- Low yellowing
Download datasheet
Calsil RTV PA 10 T
It’s a pourable bi-component RTV-2 silicone rubber, vulcanizing at room temperature with a poly-addition process without shrinkage.
Unique product features
- Perfect replica
- Highly resistant in all circumstances
- Thermo-stabòle
Download datasheet
Calsil RTV PA 12-22-25-27
pourable bi-component RTV-2 silicone rubber, vulcanizing at room temperature with a poly-addition process without shrinkage. (Mix ratio 1:1 for all)
Unique product features
- High mechanical properties and low viscosity give very flexible and resistant moulds,
- High details reproduction
- Furthermore they are biocompatible, non-toxic and they don’t release any substances both during and after the curing
Download datasheet
Calsil RTV PA 22 Spray
an addition-curing elastomer spray
Calsil RTV PA 28 A+B RED
It’s a pourable bi-component RTV-2 silicone rubber, vulcanizing at room temperature with a poly-addition
process without shrinkage.
Unique product features
- 30 Shore A
- High mechanical properties
- Low viscosity
- Flexible and resistant moulds
- High details reproduction
Download datasheet
Calsil RTV PA 28 TG
Is a two component silicone elastomer which cures at room temperature by a poly-addition reaction. This reaction can be accelerated by heat.
Unique product features
- Easy processing and curing
- Outstanding tensile and tear strength
- Low linear shrinkage (when cross-linked at room temperature)
Download datasheet
Calsil RTV PA 30
Calsil RTV PC30 is a pourable bi-component RTV-2 silicone rubber, vulcanizing at room temperature with a poly-condensation process.
Unique product features
- It gives a perfect replica of the original item
- Highly resistant in all circumstances and thermo-stable
- High tensile strength
Download datasheet
Calsil RTV PA 30 FG
It’s a pourable 2-part addition cure silicone elastomer system specially formulated for use in the food and
confectionary industries. 30 Shore A. White
Unique product features
- FDA CFR 177.2600 compliant for fatty and aqueous foods
- Very low shrinkage
- High dimensional stability
- Easily degassed
Download datasheet
Calsil RTV PA 40
It’s a pourable bi-component RTV-2 silicone rubber, vulcanizing at room temperature with a poly-addition process without shrinkage.
Unique product features
- High mechanical properties and low viscosity give very flexible and resistant moulds,
- High details reproduction
- Furthermore they are biocompatible, non-toxic and they don’t release any substances both during and after the curing
Download datasheet
Calsil RTV PA 460
It’s a 2-part addition cure silicone elastomer system.
Unique product features
- 60 Shore A
- High tear strength
- Very low shrinkage
- Chemically resistant
- Ideal for large mouldings
Download datasheet
Calsil RTV PA 501
It’s a pourable bi-component RTV-2 silicone rubber, vulcanizing at room temperature with a poly-addition process without shrinkage
Unique product features
- Transparency
- Good optical transmission
- High resistant in all circumstances
- Thermo-stable
Download datasheet
Calsil RTV PA 507
It’s a pourable bi-component RTV-2 silicone rubber, vulcanizing at room temperature with a poly-addition process without shrinkage.
Unique product features
- Good reversion resistance
- Heat stability
- Heat stability in confined environments
Download datasheet
Calsil RTV PA 508
It’s a pourable bi-component RTV-2 silicone rubber, vulcanizing at room temperature with a poly-addition process without shrinkage.
Unique product features
- Good reversion resistance
- Heat stability
- Heat stability in confined environments
Download datasheet
Calsil RTV PC 05
pourable bi-component RTV-2 silicone rubber, vulcanizing at room temperature with a poly-condensation process.
Unique product features
- It gives a perfect replica of the original item
- Highly resistant in all circumstances and thermo-stable
- high tensile strength
- Hardness 5 Sh.A
Download datasheet
Calsil RTV PC 10
a pourable bi-component RTV-2 silicone rubber, vulcanizing at room temperature with a poly-condensation process.
Unique product features
- It gives a perfect replica of the original item
- Highly resistant in all circumstances and thermo-stable
- high tensile strength
Download datasheet
Calsil RTV PC 18
Calsil RTV PC18 is a pourable bi-component RTV-2 silicone rubber, vulcanizing at room temperature with a poly-condensation process.
Unique product features
- It gives a perfect replica of the original item
- Highly resistant in all circumstances and thermo-stable
- High tensile strength
Download datasheet
Calsil RTV PC 20
Calsil RTV PC20 is a pourable bi-component RTV-2 silicone rubber, vulcanizing at room temperature with a poly-condensation process.
Unique product features
- Gives a perfect replica of the original item
- Highly resistant in all circumstances and thermo-stable
- High tensile strength
Download datasheet
Calsil RTV PC 5431
Calsil RTV PC5431 is a pourable bi-component RTV-2 silicone rubber, vulcanizing at room temperature with a poly-condensation process using our Calsil CAT. 54.
Unique product features
- It gives a perfect replica of the original item
- Highly resistant in all circumstances and thermo-stable
- For low viscosity and quick cure it can be used in spray applications to form a protective layer
Download datasheet
Calsil RTV PC 55
Calsil RTV PC55 is a pourable bi-component RTV-2 silicone rubber, vulcanizing at room temperature with a poly-condensation process using our Calsil CAT. N5 TRASP.
Unique product features
- It gives a perfect replica of the original item
- Highly resistant in all circumstances and thermo-stable
- High heat resistance and high hardness
Download datasheet
Calsil RTV PC Paste
a putty RTV-2 silicon rubber, that cures at room temperature with a poly-condensations process using our calsi® CAT. PASTE
Calsil RTV SH1
a pourable bi-component RTV-2 silicone rubber, vulcanizing at room temperature with a poly-condensation process.
Unique product features
- Hardness 13 ShA
- It gives a perfect replica of the original item
- Highly resistant in all circumstances and thermo-stable
- High fluidity, fast curing and low tear strength
- particularly recommended for aluminum foundries working in the footwear field.
Download datasheet
Calsil Spray
Aerosol-based silicone fluid with non-ozone-depleting propellants.
Unique product features
- High anti-adhesive properties that make it effective as a release agent suitable for some applications, like molding of plastics, rubber, tampography, wax casting and machine guards form adhesives.
- Excellent anti-adhesive silicone release agent for rubber and plastic.
Download datasheet
MPB 50
Calsil MPB 50 is an aqueous emulsion of modified polysiloxane resin to make resin to make silicone resin façade coating.
Unique product features
- Highly water-repellent, with high water vapor permeability
- High early water resistance
- Low tendency to soil